Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Best Of
Re: Spray foam insulation
Re: Spray foam insulation
Formaldehyde is everywhere. It is naturally occurring as well. We actually have enzymes that can metabolize it, and in fact our own bodies produce it constantly.Say it again. After Canadian fiasco some guys studied issue and UFFI is not the problem. As Jake says: formaldehyde is everywhere. But we live in the Age of Snowflakes when EVERYTHING will make us grow two heads.
jumper
1
Re: This weeks case
This should be the case of the missing apostrophe. What's the owner or tenants doing differently?
Ray, I always suspected you had magical powers and when you entered the room, boilers snapped to attention knowing that they couldn't get away with those shenanigans.
It seems to me to be a temperature related electrical connection in the thermostat, boiler or the connections between them. Or...
Maybe the gas meter is locking up from the cold and when you went there, the sun was out warming up everything, restoring order to an un-ordered world. That's my thoughts from the Twilight Zone.
I suspect that your photo of the boiler controls is a clue, but what you're implying, I don't have a clue. hmmm
Ray, I always suspected you had magical powers and when you entered the room, boilers snapped to attention knowing that they couldn't get away with those shenanigans.
It seems to me to be a temperature related electrical connection in the thermostat, boiler or the connections between them. Or...
Maybe the gas meter is locking up from the cold and when you went there, the sun was out warming up everything, restoring order to an un-ordered world. That's my thoughts from the Twilight Zone.
I suspect that your photo of the boiler controls is a clue, but what you're implying, I don't have a clue. hmmm
Re: Peerless 63 distributor/wholesaler
Appreciate it but at 4 and 1/2 hours each way, I think I will have to pass. I will need to make the trek to New Jersey. Even an hour and 15 minutes, is more than us spoiled New Yorkers like to travel.
Re: Gas piping
Town of North hempstead,N Y
Spoke an inspector today. He said he would not pass any union unless it's after a valve near an appliance. He could show me in any books though.
Spoke an inspector today. He said he would not pass any union unless it's after a valve near an appliance. He could show me in any books though.
347
1
Re: R-32
@EdTheHeaterMan Sorry, I know what everything in the song means, but still do not see any relation to the thread.Have you ever known anyone that does not know what everything in the songs mean?
Perhaps it's just over my head.
Or do only associate with motor heads?
Have you ever known anybody that does not understand thermodynamics, Hydronics and Refrigeration jargon? Or do you only associate with persons in our industry?
This attempt as sarcastic comedy relief however, is not all about you. As a matter of fact the joke was for everyone else except you. But it is nice that you shared your question about associating different aspects of the world with other aspects of the world and how they can not possibly have a correlation. We like when you chime in on this forum. Sometimes your opinions and information are actually helpful.
Thanks for pointing out that motor head jargon and trade jargon has nothing to do with each other. Unless you just look at the fact that it is jargon ...and all I said was that one jargon reminds me of the other jargon
Thanks for sharing
Edit: BTW, Betty Davis has nothing to do with cars or refrigerant, but it was a little funny.
Re: R-32
I'm at a complete loss..... How does refrigerant relate to 1960s cars / hot rods?. Hey Chris, I did an edit to explain the reference to the numbers on refrigerants numbers and 1960 hot rod numbers. Both sets of numbers need to have inside information on what those numbers actually mean. My sister would be clueless on what any of the refrig. or motor head numbers mean. But they all make sense to the trade that uses them. Look above at the edit
Here is another reference to unrelated topics:
The unitary products manufacturers have found the goose that lays the golden egg.
I remember gasoline at 24 cents a gallon. Then the 1970s happened, the price of fuel skyrocketed over 80 cents a gallon. The politician's step in to save the day and the price settled around 50 cents a gallon. The American people were satisfied to pay double the previous price. A few years later another oil crisis and fuel shot up over $1.50 per gallon, the politicians stepped in again to save the day and we were satisfied to pay about a dollar a gallon. This trend has made fuel cost over $4.00 per gallon and brought it back to $3.00 per gallon just recently. And we are going to live with the new higher price.
Anytime the fuel suppliers need to raise the price, just blame some geopolitical crisis and let the cost go way over what you really want, then drop it back to where they want it to be. Then America will be satisfied that someone reels in "Big Oil". But the price ends up higher each time.
About 25+ years ago the end of R-22 was in sight. The normal practice of installing an indoor coil or air handler and having up to 4 outdoor units connected to it over the lifetime of the furnace or air handler, came to an end. Can’t mix R-410a outdoor units with a R-22 indoor coil. Must replace the complete matched system. Now that those original R-410a units are getting to be 20+ years old, Those outdoor units might be replaced with another R410a unit. You can connect them to the existing indoor coil. But we can't have that… We must develop a newer, better refrigerant, so that you can't just swap out the condenser. We need to sell matched systems. More larger ticket parts. Make sure it is not compatible with anything they already have. This is a guarantee that every new condenser must have a matching indoor unit.
That is the golden egg. Planned refrigerant obsolescence!