Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Best Of
Re: Ok...now I'm a believer.....
Angle grinder with a cutting disk goes through it like butter.On a used poop pipe spraying that all over?
ChrisJ
7
Re: Ok...now I'm a believer.....
They are not just "Betterer" Matt. They are the BESTIST!!!
Re: Like a boy with new Toy Blocks & Erector set at Christmas 🎄
I have bent steal in my bare hands on occasion!
Click on Spoiler
Click on Spoiler
Re: Like a boy with new Toy Blocks & Erector set at Christmas 🎄
Did you wipe that in to a pvc coupler?
mattmia2
1
Re: Change spud diameter on 1-pipe steam radiator?
OOPS... Now Paul will be on line looking for a glass radiator to connect to his system to watch the condensate drain from it.
Re: Ok...now I'm a believer.....
My guys: "I need Diablo blades!!...there the best...blah blah..blah!!" We'll...I finally tried them...its NOLO CONTENDRE....6 cuts in a 4" XH soil stack in 8 minutes...Unreal. I don't care what they cost! Mad Dog
Told ya so.
ChrisJ
3
Re: Non tankless steam boiler for hot water?
Many coal stoker boilers also come with domestic hot water coils
as well so they are very common.
I hate navy showers unless I am very late for an appointment.
as well so they are very common.
I hate navy showers unless I am very late for an appointment.
leonz
1
Re: a way to get the return water hotter?
If you invest in a hot water storage tank you will have created a buffer to aid in heating your basement.
You need additional thermal mass to aid in heating your basement.
You need additional thermal mass to aid in heating your basement.
leonz
1
Re: Heating Pros: Please Help Us With This Quick Survey
Done...
IMO Very vage survey. This survey did not address Aluminium vs Stainless vs Copper materials.Lack of the industrie understanding and treating the equipment proper which would also increase the life expectancy of Condensing equipment...
It also Would be nice to see ROI, Lifetime operational cost, breakeven points for the condensing vs. Cast iron boilers in commercial vs. Residental installs.
Snowmelts here in Colorado using Condensing Boilers are a no brainer.
Based on current fuel prices in Europe the outcome of this survey would be in favor for the condensing equipment which is will no longer be installed in the residental sector as of beginning of next year.
Guessing that due to our artificially low current fuel price point the cast iron equipment is still going to be favored here in the USA especially on the East Coast.
IMO Very vage survey. This survey did not address Aluminium vs Stainless vs Copper materials.Lack of the industrie understanding and treating the equipment proper which would also increase the life expectancy of Condensing equipment...
It also Would be nice to see ROI, Lifetime operational cost, breakeven points for the condensing vs. Cast iron boilers in commercial vs. Residental installs.
Snowmelts here in Colorado using Condensing Boilers are a no brainer.
Based on current fuel prices in Europe the outcome of this survey would be in favor for the condensing equipment which is will no longer be installed in the residental sector as of beginning of next year.
Guessing that due to our artificially low current fuel price point the cast iron equipment is still going to be favored here in the USA especially on the East Coast.
Re: Plate exchanger location
@GroundUp “as you were already told” **** are you talking about facebook? No one’s heating DHW? If your the same kid who simply “said it’s piped wrong” which was the only reply I got to a different question that’s far different from your comment above, think you have your posts mixed up here bud.
Ya2UP_A
1