Best Of
Re: I'm getting solar panels. I'll let you know how it goes in this discussion thread.
amateur radio off-center fed dipole
Re: Cold Radiator
That section of horizontal riser on the top floor most likely is the trap . The radiator need to be lifted to regain the pitch in that section . Someone pulled the radiator to finish the radiator nook and left the shims out .
Hope this helps
Big Ed_4
Re: I'm getting solar panels. I'll let you know how it goes in this discussion thread.
guess we don’t live in HOAs 😂
Re: I'm getting solar panels. I'll let you know how it goes in this discussion thread.
that’s it! All installed in one day, pretty good! It won’t start operating until it clears inspections. And since my boiler, water heater, and panel upgrade, all performed by me passed, I have a feeling this professional job is gonna be fine.
without talking prices, this is about the same as a high quality steam boiler install in NJ
Re: Energy Kinetics System 2000 Heat Exchanger
You can look on supplyhouse.com for what brazed plate heat exchangers that size and number of plates cost. The one custom fabricated to EK's specs and with a special coating and some markup to cover their distribution costs will give you an idea of what a fair price is.
mattmia2
Re: Trane ac air handler
The board is usually just plugged in to the spade connectors. That one is hard wired?
HVACNUT
Re: I'm getting solar panels. I'll let you know how it goes in this discussion thread.
sounds like you may need some seismic restraints back there?
If there is access to the underside of the roof, we found it easier to miss the rafter and block across two of them and anchor to the block. Finding dead center of a rafter from above is not so easy as you may have discovered.
This was for thermal collectors, fewer mounts required.
hot_rod
Re: Does any one know who manufacture's the mini-splits sold as Mountman?
Just for a date point, I installed a Comfort Aire mini split from a large supplyhouse chain. The inverter board failed at the beginning of the season. I'm still waiting on the factory to ship the replacement. 11 weeks and counting for parts, and Comfort Aire isn't the Amazon special.
I know for a fact that inverter boards for Mitsubishi are only a week or so away.
This one goes in the lesson learned pile.
ratio
Re: I'm getting solar panels. I'll let you know how it goes in this discussion thread.
Here is what 6200W did for my place.
hot_rod