Click here to Find a Contractor in your area.
In fairness to all, we don't discuss pricing on the Wall. Thanks for your cooperation.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

ratio

About

Username
ratio
Joined
Visits
3,400
Last Active
Roles
Member
Points
280
Posts
844
Badges
18

Activity

  • bsilliman
    I installed a whole new pvc drain pipe and even tested it out by poring water into the pan to make sure that it drains and more important without leaking. I have no emergency pan, only the one. What is happening is when I turn on the air the blower motor pushes all of the water out of the pan, not allowing it to drain properly. I would slow down the blower but that doesn't seem right to do since cooler air is heavy. Additionally, all the wires to the blower motor are attached to a molex plug which of course goes to the IFC board (all wires except for the highest speed wire (black wire).
    August 15
    • ratio
      ratio
      We need some more detail. Post a few pics to your thread, from far enough back that we can see what's going on.
Avatar

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!

Badges