Best Of
Re: Rollout switch tripping
@Saul , call us on 410-321-8116 and we'll set up an appointment.
Re: Argo AR826 schematic?
Do you see any manufacturers date on the control? How old is the system.
That number doesn’t show up even in the retired products. Maybe it was an OEM control that Argo built
Some controls have dip switches to change the relay enable logic, attach a pic.
hot_rod
Re: The Loneliest Place, my new article for PHC News magazine.
you crank out a lot of content, keep sharing your knowledge.☺️
hot_rod
Re: The Loneliest Place, my new article for PHC News magazine.
Thanks Erin I appreciate it
Re: The "equalizer" is mis-named. It does nothing to equalize anything.
I can't help but think of this every time one of these discussions comes up.
ChrisJ
Re: Attached EDR vs Boiler SF of steam
OK in this case there is no "should" about it, this boiler will perform as good as any boiler you could pick.
Congratulations for getting one of the last 63 models ever produced
To quote one of my favorite movies, "it would be a shame to blow it up"
And congratulations for resisting going to the next larger one "just to be safe". You have somehow, some way, actually purchased the correct sized boiler, making you very rare around here!
DHW Recirculation Is Great!
Finished the install and wow! Maybe 10-15 seconds and there is hot water in the shower at the other end of the house.
Re: Attached EDR vs Boiler SF of steam
Thanks! What a relief. Posted wrong EDR in orig post. Old age doesn't come alone
Fizz
Re: Argo AR826 schematic?
I believe that control has cube relays. The contacts for the main heat are stuck closed. It turns off when priority has a demand because priority removes 120 volts to the contacts for the heat relay.
You could test it by swapping the priority and heat relays and see if the priority zone circulator run constantly.
The cube relays are available.
HVACNUT
Re: The "equalizer" is mis-named. It does nothing to equalize anything.
a beef is cheap here . . . .
