Welcome! Here are the website rules, as well as some tips for using this forum.

Need to contact us? Visit https://heatinghelp.com/contact-us/.

Click here to Find a Contractor in your area.

If our community has helped you, please consider making a contribution to support this website. Thanks!

Best Of

Re: Dan Holohan Retires After 36 Years of Writing Magazine Columns

You will be greatly missed. I thank you for all your help over the years. Enjoy full retirement I will maybe someday soon join you. I am 84 this past Thursday and still going strong. Thank God for good health and Irish blood.

Tim McElwain

Re: Heating stopped

a little vague, just a little,

neilc

Re: Heating stopped

And you are talking about a 3 engine triplane operating over the Bermuda triangle? or did something get lost in the model number, brand and what the heck are you talking about column?

I will try to translate:
Hello,

NOT GOODBYE

after two years of trouble free working,

My heater was working for 2 years and i did no maintenance

system

I want you to guess what kind of heater I have

stopped produce heating.

It Broke

Test shows Ground Fault Error.

I looked at the display and don't know what it means

Pressing Right side button does not change anything.

I pressed a button that I know nothing about

The temperature is at 21 degree C with the setting at 27 degrees.

And it is still broke and i don't live in the USA

I replaced the the breaker with identical one and got the same issue.

I started up the parts cannon hoping to get it right eventually

Wire reds 10 Ohm resistance as per label on it.

I have a meter

Can the control unit cause the problem?

Can you guess what might be the problem with no information at all?

Thank you all who could suggest a possible failure?

Ask me what i'm talking about and maybe i can get you some sort of info that will put you on track

Can you provide a picture or a brand and model number by chance?
We will be glad to try to help

EdTheHeaterMan

Re: Heating stopped

~~thankyou Ed~~
ahh, com on

neilc

Re: They ain't all pretty or ready for the Miss America Pageant..

That's a Long Island 🏝 C.O.D. Oil boiler special...see alot like that when people go without a Contract and a Legit oil company.
I took a bath 🛁 on the job as it is, had to draw the line. I cut out all the domestic water 💧 and coil mess and repiped. I died getting the oil coil bolts out. The new ones went on with High-Temp grease and I also pipe dope both sides of the gasket so the next guy doesn't have to spend 60 minutes chipping it off like I did. Thanks for the kind words fellas! Mad Dog 🐕

That gasket will still leak in 5 years.... I don't know why, but every tankless coil boiler I installed. I would snug up the bolts. A year later, I would go back for the "free tune-up" I included in the boiler install contract, and found the bolts were loose. Retorque them and sign up the customer for a maintenance plan. The free tune up was a way to get in the door to sell the maintenance agreement. Worked over 86% of the time. Sold lots of maintenance plans that way. Those orange gaskets must shrink a lot over the first 500 hours of use.

EdTheHeaterMan