Best Of
Re: Ever seen one of these??
looks like something the catholics would come up with. this kneeler doesn't cause enough suffering, let's make it hard and hot and pointy.
mattmia2
Re: Ever seen one of these??
That is a boot drying radiator. There was a shelf, or actually a pan across the bottom.
And of course the other thing is a humidifying pan. I believe a Chinese version is still sold from time to time, though it just hangs along the back of the radiator on S-wires, as the thin tube radiators that came out in the 30s don't have room for the tin pan.
Re: Dry or wet return Trying to figure out this nightmare Trane 210 ultimately has me stumped
Here is a Trane bulletin that shows a piping diagram:
Re: Myers C48D53B86 jet pump- Help
The labels on the container have good, pertinent info.
If the bucket is 100% that is the flash point number to be aware of.
hot_rod
Re: Myers C48D53B86 jet pump- Help
Does the container have a red "flammable" diamond on it? Both E and M geo fluids are flammable. It's the vapors to be aware of.
If there are potable water HXers, those need to be double walled.
Stay safe!
hot_rod
Re: Myers C48D53B86 jet pump- Help
i believe over 50% ethanol solutions are flammable and under 50% are not. or my high school chem teacher and the moonshiners have the wrong concentration.
mattmia2
Re: Furnace vibration
Depends on the type of blower. belt drive or direct drive? misalignment of the belt to sheave. improperly installed sheave. loose mounts, etc.
The classic is the wiring diagram or any papers falling into the squirrel cage.
pedmec
Re: Furnace vibration
Easy enough to download the manual when you see the make and model. There are some indications when you look at it if it is suitable for horizontal mounting, connections on the side, pan around the A coil?
Stuff jammed in the blower wheel vanes is a common cause of the shakes.
I think of good vibrations…
hot_rod
Re: Monoflow/Reverse Return Piping Question
Got a sketch of what you are thinking, monoflos are not so common anymore, hard to purge, often the emitters are in series so the SWT drops from one to the next.
Seems like a basic reverse return simplifies the project without needing monoflo tees?
hot_rod
Re: Myers C48D53B86 jet pump- Help
You just need to attach a key to the pump somewhere with a piece of wire.
mattmia2