Best Of
Re: 1966 heating oil tank
Two things I have not noticed in any comments
- Oil tanks can rot away from the inside. That is the usual way a basement tank starts to leak since the outside of the tank is protected from the weather. That said, removing the tank bottom deposits and sludge from the bottom may expose some pin holes that are being blocked or plugged up by that sludge. Spending $$$ to clean a tank may clean the leaks out and then you need a new tank ASAP!
- Never put any oil from your old tank back into your new tank!!! So plan on running out of oil the day you are getting your new tank. Any combination of sludge and oil that is left in the old tank needs to be disposed of. Don't try to save a few dollars by putting 60 years of oil problems in your brand new tank.
Additionally, consider a double wall plastic tank like the Roth or Granby offerings.
Re: 1966 heating oil tank
@ChrisJ I think the OP mentioned he had the side outlet for the oil and no one pitched tanks back in the old days.
Big question in my mind if those things even help but can't hurt.
To prevent sludge I used to promote a two pipe system to constantly filter the oil. But I am by myself on that one . For some reason everyone thinks a two pipe system is death. Leak in the return line is the only comment I get which I find crazy
Re: Is there a list of the best help forums for the various 'challenges' we encounter?
I agree with @EdTheHeaterMan , Heating help is the best!!!
Mike Holt electrical is the best I have found for electrical. But they have decided for liability reasons to only allow people licensed in the electrical trade, (Electricians, contractors and engineers) to participate on that forum.
That forum is one that like Heating Help the people that participate are respectful (for the most part) and they don't allow nasty stuff or swearing etc.
Re: 25 Years ago.....
he got too caught up in trying to figure out what happened to that young kid in the picture that he forgot to post it
Re: 25 Years ago.....
I know of no person in any industry or profession that has done more to educate the rank & file, motivate them, and bring them together than Dan Holohan…Very, very fortunate to have rode the wave behind his Surfboard ..mad Dog
Mad Dog_2
Re: Near boiler piping/replacement boiler
Run to failure..unless you have extra disposal income....Mad Dog
Re: Near boiler piping/replacement boiler
If it's not broke don't fix it.
Get quotes on new boilers (you will be shocked). Then start saving. Do an accurate heat loss and get the right size equipment and the right contractor.
Consider an Energy Kinetics boiler.
Re: Indirect water heater operation sequence
Why I don’t like fill valves screwed to black pipe.
Re: Near boiler piping/replacement boiler
Three zones with 50'/zone = 150' x ~500 BTU/ft. @ 180° = 75,000 BTU. One inch pipe is fine for that load.
If you really want to do something, pipe it primary-secondary to keep the large boiler happy.



