some people will do anything to keep from fixing the problem
Comments
-
-
-
-
-
food containers are already watertight
0 -
There's a half-dozen of these on the various units. I don't understand why they didn't slap also in a heater to evaporate the water out so they didn't have to empty them. Here's my favorite one:
0 -
Being an electrician, I take offence!!! LOL.
I have seen plenty of electrical hack work, but I am not sure an electrician would be dumb enough to do this. I hope not.
Especially the first picture with it mounted over the electrical switches.
Not only did they have to seal the KOs but how about all the holes in the bottom of the box?
And then he chewed one of the cover screws and the ear off the box to have enough room for the float switch.
he could have at least used a 4 11/16 box instead of the 4" to give himself more room.
@ratio your right they did work hard to do a **** job.
1 -
-
use a bell box
0 -
@EBEBRATT-Ed did i ever ask you what you call these things
0 -
-
-
that's new one but related to one of the other names i've seen
0 -
-
-
Madison clamps. Also good for jumping out meter cans.
0 -
Funny, we call them Madison bars.
0 -
Here they are Battleships
Or box supports for old work
0 -
-
Categories
- All Categories
- 87.6K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 429 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 119 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 394 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 50 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements












