Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Permits? Ya ya we’ll pull permits

Options
stonebutson
stonebutson Member Posts: 24
in THE MAIN WALL
Are there any craftsmen left ?
JellisSuperTechZmanSolid_Fuel_Man

Comments

  • Grallert
    Grallert Member Posts: 644
    Options
    they might as well have glued the yellow placard to the window.
    Miss Hall's School service mechanic, greenhouse manager,teacher and dog walker
    Canucker
  • Steamhead
    Steamhead Member Posts: 16,834
    Options
    Uhhhhhhhh, Beavis...... huh-huh huh-huh huh-huh

    I sure hope the inspector didn't pass that mess...............
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • hot_rod
    hot_rod Member Posts: 22,134
    Options
    looks like they even drilled the stair tread.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • STEAM DOCTOR
    STEAM DOCTOR Member Posts: 1,967
    Options
    The kids will have a field day. Can't imagine what will end up inside.
  • KC_Jones
    KC_Jones Member Posts: 5,737
    Options
    I just called my borough on a related topic.
    Me: Are permits required for the replacement of a steam boiler
    Borogh: No
    Me: None of them?
    Borough: No

    Some areas aren't minding the store.
    2014 Weil Mclain EG-40
    EcoSteam ES-20 Advanced Boiler Control
    Boiler pictures updated 2/21/15
  • STEVEusaPA
    STEVEusaPA Member Posts: 6,506
    Options
    Good bye, lunch...
    You have to warn people to wait 15 minutes after they eat before looking at the pictures...lol.
    Sadly, not the worse...
    steve
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,520
    Options
    MA. is/was known as one of the strictest states. At one time I had about 11 licenses, let a bunch of them go.

    Now, nobody seems to give a crap. Some only get permits if they are forced into it by needing a gas meter or an electric meter for electrical work.

    And the inspectors, that's another story. Our Governor wan't to do away with licensing.
  • pecmsg
    pecmsg Member Posts: 4,845
    Options
    > @stonebutson said:
    > Are there any craftsmen left ?

    It looks like they even used a level to screw it up properly!
    GrallertCanucker
  • Zman
    Zman Member Posts: 7,569
    Options
    At least it will steam the wrinkle out of your clothes on the way by.
    It's hard to say what is worse, Blasting the folks on the stairs or the operable window.
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,520
    Options
    It's a reading problem.

    We all see steam boiler posted here that are installed wrong because the installer didn't read the install manual.

    Imagine that someone that knows absolutely nothing about steam but could put pipe together could pipe a boiler better than the "professional" installers who can't read.

    This is the same thing.

    Mod cons and 90% furnaces generally have the same flue requirements.

    But every manufacturer requires something different.

    You have to be able to read

    Lazy
    mattmia2kcoppGroundUpCanucker
  • mattmia2
    mattmia2 Member Posts: 9,639
    Options
    They all seem to have the same vent diagram that someone that is no longer there drew in 1985 and no one that knows why it was that way is there anymore.
  • ratio
    ratio Member Posts: 3,626
    Options
    Well, the other guy was going to change too much, these guys did it for a lot cheaper!!!1!
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,002
    Options
    Maybe the vents were there first and the stairs later. : )
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
    rick in Alaska
  • stonebutson
    stonebutson Member Posts: 24
    Options
    I thought so too - window looks oem
  • BillyO
    BillyO Member Posts: 277
    Options
    I stared and looked at pic for 3 minutes, usually after 3 seconds I can come up with something stupid to say that annoys most. Im speechless for first time
  • Ironman
    Ironman Member Posts: 7,376
    Options
    I see the problem: the right vent termination is one inch higher than the left... :D
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    STEVEusaPA
  • STEVEusaPA
    STEVEusaPA Member Posts: 6,506
    Options
    Ironman said:

    I see the problem: the right vent termination is one inch higher than the left... :D

    That was to account for the fact the steps go up...
    steve
    IronmanCanuckerAlan (California Radiant) Forbes
  • BillyO
    BillyO Member Posts: 277
    Options
    gorgeous drapes
    Grallert
  • Solid_Fuel_Man
    Solid_Fuel_Man Member Posts: 2,646
    Options
    And to think they dare use PVC.

    Should have used vent ells, everyone knows that you need a vent ell for venting. Sheesh
    Serving Northern Maine HVAC & Controls. I burn wood, it smells good!
    BillyO
  • SlamDunk
    SlamDunk Member Posts: 1,580
    Options
    Slightly related to topic-

    https://www.scmp.com/news/hong-kong/health-environment/article/3050068/coronavirus-your-toilet-how-hong-kong-policy

  • mattmia2
    mattmia2 Member Posts: 9,639
    Options
    is that polybutylene water supply pipe(that is about the size of a fire hydrant)
  • Wellness
    Wellness Member Posts: 141
    Options
    @BillyO "gorgeous drapes". :) You win the Internet today.
    Grallert

Categories