Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

BURNHAM IN8 residental gas boiler pipeing ???

13»

Comments

  • billy42945
    billy42945 Member Posts: 47
    They are on the third circulator as of today Jan. 1 2021
  • ethicalpaul
    ethicalpaul Member Posts: 6,383
    Each one that iron Grundfos?

    NJ Steam Homeowner.
    Free NJ and remote steam advice: https://heatinghelp.com/find-a-contractor/detail/new-jersey-steam-help/
    See my sight glass boiler videos: https://bit.ly/3sZW1el

  • Jamie Hall
    Jamie Hall Member Posts: 24,493
    billy42945 said:

    They are on the third circulator as of today Jan. 1 2021

    Somehow that doesn't surprise me. How is the install otherwise now?

    I can think off hand of two really good steam guys in Massachusetts. PIty you didn't have one..
    Br. Jamie, osb
    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
  • billy42945
    billy42945 Member Posts: 47
    The install has been a disaster from the start the general contractor has been thire for 3 years and most subs are not being paid.
  • Ironman
    Ironman Member Posts: 7,510
    A wet rotor circulator should not be used in that application. A bronze series 100 or equivalent is what's needed with a strainer before it.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • systex
    systex Member Posts: 1
    Jamie Hall said:

    I can think off hand of two really good steam guys in Massachusetts.

    I'm in MA and have copper near boiler piping I need redone. Care to share who you trust in MA? I'm already in the queue for NE Steamworks, but hoping to find at least one more expert to come out and give an opinion/quote.
  • ChrisJ
    ChrisJ Member Posts: 16,230
    systex said:

    Jamie Hall said:

    I can think off hand of two really good steam guys in Massachusetts.

    I'm in MA and have copper near boiler piping I need redone. Care to share who you trust in MA? I'm already in the queue for NE Steamworks, but hoping to find at least one more expert to come out and give an opinion/quote.
    @Charlie from wmass
    Charles Garrity is who I'd use.
    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment

Categories