Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Manly Wrenches (and more) for Sale

136lin
136lin Member Posts: 30
I have 1- 48" Rigid Pipe wrench and 1- 36" Rigid Pipe wrench for sale both are steel ( or ductile iron?) and definitely used but still very useable. In addition I have a Rigid four wheel cutter for 21/2"-4" pipe,(#44-S). and I have a Rigid tube cutter for up to 3" copper both like new. I also have a McDonnell Miller # 67 LWCO, new in the box as well as gas control valves (24 volt, maybe one MV) and misc. steam and hot water heat parts. I am in S.E. Michigan , north of Detroit.

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,506
    I'm not manly. lol. I have a pile of them. Only use aluminum pipe wrenches and a cheater pipe if needed...
    steve
  • Ironman
    Ironman Member Posts: 7,367
    What's the price?
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • retiredguy
    retiredguy Member Posts: 898
    What, no 96", 84", or 60" Ridgid pipe wrenches for sale. 48" and 36" are only middle sizes.
    IronmanSTEVEusaPAjamplumb
  • unclejohn
    unclejohn Member Posts: 1,833
    I have a 24" and a 5' piece of 3" pipe. Never let me down.
  • Big Ed_4
    Big Ed_4 Member Posts: 2,761
    I switch to aluminum wrenches years ago , now they are too heavy :)
    I have enough experience to know , that I dont know it all
    mattmia2STEVEusaPA
  • 136lin
    136lin Member Posts: 30
    Heating goods and wrenches still available.
  • Ironman
    Ironman Member Posts: 7,367
    Again, What's the price?
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • AlanBrase
    AlanBrase Member Posts: 4

    What, no 96", 84", or 60" Ridgid pipe wrenches for sale. 48" and 36" are only middle sizes.

    New to this forum. Did they actually have 5, 6, 7, 8 foot pipe wrenches? I have a big old mansion house with a steam tunnel and BIG pipe screwed together. I always marveled at it.What manner of men and wrenches screwed it tight? But I think it needs to go away now. Not used in 40 years. I fear 100 year old trapezes when I get under them.
  • ratio
    ratio Member Posts: 3,615
    The old pipefitters I've run in to, they just kind of glared at the pipes until they tightened themselves up.
    MrScottjamplumb
  • pecmsg
    pecmsg Member Posts: 4,775
    There’s a reason their upper arms were bigger then my neck!
  • Steamhead
    Steamhead Member Posts: 16,796
    AlanBrase said:

    What, no 96", 84", or 60" Ridgid pipe wrenches for sale. 48" and 36" are only middle sizes.

    New to this forum. Did they actually have 5, 6, 7, 8 foot pipe wrenches? I have a big old mansion house with a steam tunnel and BIG pipe screwed together. I always marveled at it.What manner of men and wrenches screwed it tight? But I think it needs to go away now. Not used in 40 years. I fear 100 year old trapezes when I get under them.
    Where is this located?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,452
    4' is the largest I have seen except for the chain wrenches which have more capacity and are lighter
  • MrScott
    MrScott Member Posts: 15
    If you want to sell something, especially used, it helps to post price, shipping cost, preferably some pictures.  
    bucksnortjamplumb
  • retiredguy
    retiredguy Member Posts: 898
    I used ridgid 60" and 72" pipe wrenches in my younger days and as far as a 96" (8 foot) I only saw one in a piping supply house in Pittsburgh, Pa. Now that was a big pipe wrench. That wrench was slated to be picked up by one of the railroad companies for use in their repair shop.

    Many years ago, I was in a high school in Erie, Pa. and a lot of the boiler room steam lines were 12" screwed pipe and valves. It was a sight to behold. I should have taken some photos.