Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Peerless repipe

Dave0176
Dave0176 Member Posts: 1,177
edited May 2019 in Strictly Steam
Repiping a 63-03 and down firing it to a 63-03L. Oversized, terrible piping, and copper to boot. Not a problem for us.....






DL Mechanical LLC Heating, Cooling and Plumbing 732-266-5386
NJ Master HVACR Lic# 4630
Specializing in Steam Heating, Serving the residents of New Jersey
https://heatinghelp.com/find-a-contractor/detail/dl-mechanical-llc

https://m.facebook.com/DL-Mechanical-LLC-315309995326627/?ref=content_filter

I cannot force people to spend money, I can only suggest how to spend it wisely.......
IronmanChrisJ

Comments

  • Motorapido
    Motorapido Member Posts: 307
    What did you do to down fire it? I didn't think that was an approved option for that peerless. I have a 50 percent oversize peerless that I'd like to down fire.
  • ethicalpaul
    ethicalpaul Member Posts: 5,694
    edited May 2019
    You can go down from the standard size to the “L” variant (or vice versa) I believe with a conversion kit that Peerless sells for their 63 line.

    Beautiful dual supply drop on that little guy, Dave!

    Did you get the size pretty close? What was the radiated EDR?
    NJ Steam Homeowner. See my sight glass boiler videos: https://bit.ly/3sZW1el
  • STEAM DOCTOR
    STEAM DOCTOR Member Posts: 1,951
    edited May 2019
    Peerless makes their gas boilers with option of using one of two burner trays. The 63-03 and the 63-03L are the same boiler with different sized burner trays. Weil Mclain does the same thing.
    ethicalpaul
  • Dave0176
    Dave0176 Member Posts: 1,177
    The only thing different is the burner manifold. 63-03 is tapped 4 burners and the L is tapped with 3.
    DL Mechanical LLC Heating, Cooling and Plumbing 732-266-5386
    NJ Master HVACR Lic# 4630
    Specializing in Steam Heating, Serving the residents of New Jersey
    https://heatinghelp.com/find-a-contractor/detail/dl-mechanical-llc

    https://m.facebook.com/DL-Mechanical-LLC-315309995326627/?ref=content_filter

    I cannot force people to spend money, I can only suggest how to spend it wisely.......
    ethicalpaul
  • Fred
    Fred Member Posts: 8,542
    Nice!
  • STEAM DOCTOR
    STEAM DOCTOR Member Posts: 1,951
    > @Dave0176 said:
    > The only thing different is the burner manifold. 63-03 is tapped 4 burners and the L is tapped with 3.

    The boiler manual does list a different part number for the flue collector. 63-03 is 50281. 63-03L is 50282. Not sure if there is an actual difference. The WM boilers have different draft hoods for same sized boilers with different manifolds
  • Intplm.
    Intplm. Member Posts: 1,880
    Lookin Good !
  • Bio
    Bio Member Posts: 278
    Really like the boiler header to main reducing elbow, nice looking job
  • Dave0176
    Dave0176 Member Posts: 1,177
    edited June 2019
    Finally got back and finished this job. We also ran a new main into the new extension on the home with two more radiators that the AC guy said couldn’t be done without high expenses. :#
    Anyway forgot to snap pics of all the new stuff. Spent half a day in a crawl space running pipe. It’s all part of the job....... Also the chimney was eliminated during the renovation so they concocted this long flue run, I don’t like it but it’s what I had to work with. Also sent the cycle guard LWCO to the scrap yard. :D




    DL Mechanical LLC Heating, Cooling and Plumbing 732-266-5386
    NJ Master HVACR Lic# 4630
    Specializing in Steam Heating, Serving the residents of New Jersey
    https://heatinghelp.com/find-a-contractor/detail/dl-mechanical-llc

    https://m.facebook.com/DL-Mechanical-LLC-315309995326627/?ref=content_filter

    I cannot force people to spend money, I can only suggest how to spend it wisely.......
    ethicalpaul
  • BillyO
    BillyO Member Posts: 277
    BEATIFUL JOB!!! High gloss black rustoleum on that near boiler piping would look pretty
  • wz25
    wz25 Member Posts: 22
    Yes, but then the insulation would have covered it all :)
    ethicalpaulSeanBeans
  • Hap_Hazzard
    Hap_Hazzard Member Posts: 2,846
    What size are those risers, 2" or 2½"?
    Just another DIYer | King of Prussia, PA
    1983(?) Peerless G-561-W-S | 3" drop header, CG400-1090, VXT-24
  • wz25
    wz25 Member Posts: 22
    2" risers
    Hap_Hazzard