Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Whoops!

Harvey Ramer
Harvey Ramer Member Posts: 2,264
in THE MAIN WALL
Think I can get a warranty on this? I swear I had my hands in my pockets and was just standing there when it happened.
Or maybe I could go with, the pump sucked it flat? lol
Rich_49Steve MinnichErin Holohan Haskell

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • kcopp
    kcopp Member Posts: 4,555
    wrong size jaws?
  • hot_rod
    hot_rod Member Posts: 25,079
    A venturi style iso-flange, nice invention!
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • pecmsg
    pecmsg Member Posts: 6,078
    Sta Brite #8 can fix that!
    njtommy
  • Paul48
    Paul48 Member Posts: 4,469
    Does it whistle when you blow on it? It's a stocking stuffer!!!
  • njtommy
    njtommy Member Posts: 1,105
    Sometimes you just forget to think.
  • Steamhead
    Steamhead Member Posts: 17,789
    No problem, that'll buff out.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    Erin Holohan Haskell
  • Abracadabra
    Abracadabra Member Posts: 1,949
    lol! nothing a bit of solder won't fix ;)
  • Gordy
    Gordy Member Posts: 9,546
    That moment when you laugh at yourself?
    njtommyZman
  • Canucker
    Canucker Member Posts: 723
    Get the hammer out. If that doesn't fix it, it's obviously an electrical problem :smile:
    You can have it good, fast or cheap. Pick two
    Tom_133Erin Holohan HaskellLeo_G
  • Ironman
    Ironman Member Posts: 7,720
    edited December 2015
    If you blow in the pipe hard enough with the valve closed, it should pop right back out. ;)

    I did the same thing in a blind spot on an 1 1/4" line a few years ago.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • SWEI
    SWEI Member Posts: 7,348
    I think your pump may be a tad oversized.
  • Charlie from wmass
    Charlie from wmass Member Posts: 4,414
    They technically could send you a new joint if someone just took it off the assembly line. They have the technology, they can rebuild it to be better than it is.
    Cost is what you spend , value is what you get.

    cell # 413-841-6726
    https://heatinghelp.com/find-a-contractor/detail/charles-garrity-plumbing-and-heating
  • bob eck
    bob eck Member Posts: 930
    Did it come out of the box this way? It makes me mad when that happens!
  • Harvey Ramer
    Harvey Ramer Member Posts: 2,264
    Wrong size jaws. The "Waste of Haste".

    All the comments made me chuckle.
    Erin Holohan Haskell
  • Larry Weingarten
    Larry Weingarten Member Posts: 3,845
    Harvey; Takes a big man to use his mistake as a teaching tool for all to see! Any chance of getting a replacement brass end for that flange or is it best used as a training tool/paper weight? Thanks!

    Yours, Larry

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories