Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Carburetor video

Options
Zman
Zman Member Posts: 7,611
in THE MAIN WALL
If you have 25 minutes or so and a couple beers, this one is worth your time.
https://www.youtube.com/watch?v=toVfvRhWbj8
"If you can't explain it simply, you don't understand it well enough"
Albert Einstein
ChrisJ

Comments

  • mattmia2
    mattmia2 Member Posts: 13,251
    sure that's not a breathalyzer?
  • mattmia2
    mattmia2 Member Posts: 13,251
    25 minutes and didn't even explain the different circuits or the governor? Somewhere out there is a web site wit pictures calling out where the different circuits are in lots of common small engine carbs.
  • pecmsg
    pecmsg Member Posts: 6,243
    I gave up after Mechanical Engineer.
  • ChrisJ
    ChrisJ Member Posts: 16,796
    edited July 2021
    pecmsg said:

    I gave up after Mechanical Engineer.

    That's a little strange.
    Isn't it?

    Why would you give up after he said mechanical engineer?

    Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

  • Zman
    Zman Member Posts: 7,611
    Wow, tough crowd!
    I thought the general theory and slow mo photography was awesome.
    He did acknowledge that there is more to it in terms of circuits and governors.
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
    ChrisJBoonmattmia2
  • Tom_133
    Tom_133 Member Posts: 930
    Zman, I am right there with you. Loved the video, and it made the theory behind a carburetor so clear in my head that I can almost explain it well to someone else. Hes a sharp guy who makes tough concepts easy. I like his laminar flow videos as well.
    Tom
    Montpelier Vt
  • Jamie Hall
    Jamie Hall Member Posts: 26,119
    Don't knock it too hard. You'd be amazed how many folks out there have absolutely zero idea as to how a carburetor works, or even what it's for.

    Now a nice video on tuning a Quadrajet...
    Br. Jamie, osb
    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
    Zmanmattmia2ratio
  • ChrisJ
    ChrisJ Member Posts: 16,796
    Jamie Hall said:
    Don't knock it too hard. You'd be amazed how many folks out there have absolutely zero idea as to how a carburetor works, or even what it's for. Now a nice video on tuning a Quadrajet...
    I can tune one pretty fast if you need help.
    Both old style and computer controlled.

    Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

    Zman
  • Jamie Hall
    Jamie Hall Member Posts: 26,119
    Nope. Last car I had with a Quad went away some years back...
    Br. Jamie, osb
    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
    Intplm.

Categories