Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Nice Header

Options
Here's one to make you scratch your head...


New England SteamWorks
Service, Installation, & Restoration of Steam Heating Systems
newenglandsteamworks.com

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    Options
    Does it work at all? The 2 tees connected to make an 'H' is something.

    There was an error rendering this rich post.

  • SeanBeans
    SeanBeans Member Posts: 520
    Options
    That’s a closed spaced tee alright!
    Ironmandelta T
  • Steamhead
    Steamhead Member Posts: 16,842
    Options
    Looks like a Crown-rebranded Dunkirk. And of course they bushed the steam outlets down to 2"....... you can't fix stupid.

    I know what it'll look like when you're done with it!
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • ratio
    ratio Member Posts: 3,627
    Options
    It's not just a Hartford loop? Maybe a little high?
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,534
    Options
    Didn't know you could do primary secondary with steam and closely spaced tees. That's different.

    There are more creative steam installers doing this type of work than we could ever fix
    New England SteamWorks
  • mikeg2015
    mikeg2015 Member Posts: 1,194
    Options
    I tell people all the time. This trade isn’t that hard, at minimum, you just have to open that little packet of paperwork that comes with the equipment and make it look like the picture. The hacks make us seem like geniuses.

    Maybe some installers could never color inside the lines when they were kids.
    CanuckerDZoro
  • danski0224
    danski0224 Member Posts: 7
    Options
    The factory provided kneepads? :)
  • pecmsg
    pecmsg Member Posts: 4,855
    Options

    Does it work at all? The 2 tees connected to make an 'H' is something.

    That's for HELP ME!
    STEVEusaPA