Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Meet Noah

New England SteamWorks
New England SteamWorks Member Posts: 1,525
in Strictly Steam
Future Patriots linebacker, despite being born 3 months early:



New England SteamWorks
Service, Installation, & Restoration of Steam Heating Systems
newenglandsteamworks.com
Dave0176cnmdesign

Comments

  • New England SteamWorks
    New England SteamWorks Member Posts: 1,525
    And little Noah certainly can't go home to a cold house now, could he?

    We like to think what we do is a little magical, but it all pales in comparison to this little fella.

    So once again, time to get to work!

    The old boiler just won't cut the mustard with a preemie:


    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
  • New England SteamWorks
    New England SteamWorks Member Posts: 1,525
    No, only the best will do in these circumstances. Which is very rewarding, to say the least:







    And counter-flow vents:



    Good Speed Noah, and on to Super Bowl LXXV!


    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
    Ironman
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,594
    Whew, Ryan! Thank God. Is Mama okay?
    Retired and loving it.
  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    Look how pretty!!!
    The baby is cute too.
    Too bad about being a Patriots fan...but he'll probably still get to be old enough to see Brady play.

    There was an error rendering this rich post.

    New England SteamWorks
  • New England SteamWorks
    New England SteamWorks Member Posts: 1,525
    Mom is fine!
    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
  • New England SteamWorks
    New England SteamWorks Member Posts: 1,525
    STEVEusaPA said:

    Look how pretty!!!
    Too bad about being a Patriots fan...but he'll probably still get to be old enough to see Brady play.

    I hope I get to be old enough to see Noah play!
    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,594
    Great, Ryan. Great!
    Retired and loving it.
  • ScottSecor
    ScottSecor Member Posts: 885
    edited September 2018
    I'm thinking Noah may be a rookie wide receiver by the time Brady decides to retire.

    Great job on the install by the way, looks excellent.
  • Erin Holohan Haskell
    Erin Holohan Haskell Member, Moderator, Administrator Posts: 2,353
    Ryan, I'm glad everyone is doing well and that it'll be a cozy winter thanks to your hard work. Here's to little Noah and his bright future.

    My daughter was a preemie too. Now she's the tallest kid in her class.

    President
    HeatingHelp.com

    Alan Welch
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,594
    And I remember when Bridget was as small as my hand. God bless the child.
    Retired and loving it.
  • Fred
    Fred Member Posts: 8,542
    Congratulations, All the way around!
  • gfrbrookline
    gfrbrookline Member Posts: 753
    Ryan is one of the few who are reincarnated dead men of steam. We are all lucky to have him.
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 16,251
    Congratulations!! Nice job, Noah and the boiler!!

    I was born in 53' weighed about 2lbs, they didn't think I was gonna make it.

    Still here.

    Unfortunately I have more than made up for the low birth weight
    New England SteamWorksSeanBeans
  • gerry gill
    gerry gill Member Posts: 3,078
    yeah- great job on both accounts!!
    gwgillplumbingandheating.com
    Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.

  • lchmb
    lchmb Member Posts: 2,997
    Well done to all involved!!
  • New England SteamWorks
    New England SteamWorks Member Posts: 1,525
    5lbs, 10 ounces!




    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
    b_bzIronmancnmdesign
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,594
    Beautiful
    Retired and loving it.
  • Sailah
    Sailah Member Posts: 826
    He needs a 48" pipe wrench in his hands for scale!

    I remember those days fun times. Mostly lol
    Peter Owens
    SteamIQ
  • Erin Holohan Haskell
    Erin Holohan Haskell Member, Moderator, Administrator Posts: 2,353
    So sweet. Congratulations!

    President
    HeatingHelp.com

  • ratio
    ratio Member Posts: 3,774
    <sigh>

    A few months ago, my youngest (4yo) told his mommy "You never have any babies". Fortunately for him (& I), he's got a few baby cousins to be the big kid for.

    Erin Holohan Haskell
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,594
    @ratio That's hilarious!
    Retired and loving it.
  • BobC
    BobC Member Posts: 5,495
    He's a tough little guy so lets get Noah started right. maybe a small pipe wrench and a canopy of pages from TLAOSH.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 16,251
    An 8" pipe wrench will do for now. Then a 10, 12,14,18,24,36 and then a 48" Aluminum when he graduates!!!!!!

    Skip the 5' wrench
  • BobC
    BobC Member Posts: 5,495
    That reminds me of a great score I made on ebay a while back. I had wanted an offset Ridgid pipe wrench for a while but as a homeowner I balked at the price of a new one.

    One day I came across an offering of 6 pipe wrenches 8-18" for $25 and one looked like it might be an offset by the grainy picture. I bit and about eight days later a battered box showed up on the porch. Inside was a Ridgid offset, a 14" straight Ridgid. a 10" stilson style and 4 other mixed brands 12-16" - all in good shape. i got 7 wrenches in good used shape and not one Chinese in the lot.

    I gave 3 of them away and added the rest to my collection. Some poor deceased soul is rolling in his grave but I'd like to assure him all of these will be put to good use.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,594
    Hard to top that deal, Bob!
    Retired and loving it.
  • nibs
    nibs Member Posts: 516
    Daughter was a premie, spent the first month in hospital, SWMBO went there 6 times daily for the feedings.
    Daughter went on to springboard & platform diving at national level. Now we have 2 little gdaughters living across the street.
    ratio
  • ratio
    ratio Member Posts: 3,774
    Beautiful
  • Fred
    Fred Member Posts: 8,542
    Wow, how much he has grown! Beautiful, he's ready for a couple wrenches now.
  • luketheplumber
    luketheplumber Member Posts: 157
    boiler room baby

    Located in durham NC.

    SeanBeans
  • rjheater
    rjheater Member Posts: 6
    Good looking boy!
  • Erin Holohan Haskell
    Erin Holohan Haskell Member, Moderator, Administrator Posts: 2,353
    That's wonderful news. He's so sweet. Glad he's home for the holidays.

    President
    HeatingHelp.com

  • New England SteamWorks
    New England SteamWorks Member Posts: 1,525
    He's a ham!

    Meet the parents:




    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
  • Dave0176
    Dave0176 Member Posts: 1,178
    God bless them and Merry Christmas!!
    DL Mechanical LLC Heating, Cooling and Plumbing 732-266-5386
    NJ Master HVACR Lic# 4630
    Specializing in Steam Heating, Serving the residents of New Jersey
    https://heatinghelp.com/find-a-contractor/detail/dl-mechanical-llc

    https://m.facebook.com/DL-Mechanical-LLC-315309995326627/?ref=content_filter

    I cannot force people to spend money, I can only suggest how to spend it wisely.......
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,594
    To life! Bless you all.
    Retired and loving it.
  • pecmsg
    pecmsg Member Posts: 5,230
    Congrats.......

    Its fun being a grandparent
  • nibs
    nibs Member Posts: 516
    Congratulations, especially for Noah's mom for all her late night feeding trips.
    Just spent a week camping with the grandkids, in AZ., exhausting but fun.

Categories