Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

who makes...

John S.
John S. Member Posts: 260
in THE MAIN WALL
an 18" flue damper?

Comments

  • Ken_8
    Ken_8 Member Posts: 1,640
    Sorry,

    I thought you were referring to a draft regulator.

    "Never mind..."
  • J.C.A._3
    J.C.A._3 Member Posts: 2,980
    My Hero....

    I think I'll keep him.(let's see if we can make this go over 50 posts!) Fun , Ain't it? Chris
  • John S.
    John S. Member Posts: 260
    it's for replacement.

    I can't find any mfr on the damper itself, however, the motor and controls are all there. Had a relay switch or two go bad and the electrician would (obviously) like a wiring diagram for it. The motor is Honeywell but the other side I do not know. For the time being, the damper has just been secured open.

    Thanks for the mfr names.

    J.C.A.,

    5 down, 45 to go:)

  • Al Corelli
    Al Corelli Member Posts: 454


    Honeywell motor?
    Maybe Flair mfg.?
  • Doug Oest
    Doug Oest Member Posts: 34
    18\" damper

    Did you try Wing?
  • John S.
    John S. Member Posts: 260
    Thanks all for your help!

    I finally found the paperwork for it buried in a file cabinet. It's an 18" EnergyVent.
This discussion has been closed.

Categories