Pipe Vise Stand and Bracket

Alan (California Radiant) Forbes · January 21

Just bought a new truck. It comes with everything except a slide-out pipe vise bracket like the one pictured, but I can’t find one for sale anywhere. Fabrication is a second choice if I can’t find one off the shelf.
Does anyone have a source?

pecmsg · January 21

i’ve seen that slipping for the trailer hitch a little low but out of the way

JUGHNE · January 21

American Van has a floor mount telescoping bracket for vice mounting.

I have gotten a lot of items from them and all was good.

pecmsg · January 21

https://pipevise.com/products/the-big-boy-apv05?srsltid=AfmBOopoJAl44KMpEPWPImcpdkGtT4MuOBYDn8pIqOaaMYBA_aMIxfem

or

https://www.americanvan.com/hitch-vise-mount-av-hvm-all-1944.html?gad_source=1&gad_campaignid=21545872485&gbraid=0AAAAAD_nZnHzdSR2bbL2vSP8a27QBMPK0&gclid=CjwKCAiAj8LLBhAkEiwAJjbY7-xeQIwS8HA5qCMN2r1Cecs7_70dgqbwlw0shGa2Pr5BcOXbUrjGIxoCVyIQAvD_BwE

JimP · January 21

This image is from the Knapheide website.

Larry Weingarten · January 21

Hi, Like @JUGHNE , I used their van vice mount with great success. https://www.americanvan.com/slide-out-vise-mount-av-svm-11-1006.html

Yours, Larry

hot_rod · January 21

That bumper is stout enough to mount the bottom 1/2 of a regular yoke type pipe vice.

Or detachable receiver type, like this.

Nice truck, beefy pipe rack. I like the colors

hot_rod · January 21

A lot of guys and gals swear by this Bigfoot type of vise. You could rig a bumper mount, and use it as a portable with some clever bracketing

EBEBRATT-Ed · January 21

Like the looks of the bigfoot. If I was working, I would get one.

But it takes the fun out of kneeling on a concrete floor with two pipe wrenches

hot_rod · January 21

https://www.youtube.com/watch?v=ESgyUVzkvY0

mattmia2 · January 21

i bought one of those guillotine style pipe vises used with the intent of bolting to a couple foot long piece of 2x.

ethicalpaul · January 21

I like the way you worded that. I have a lot of intentions too 😅

Nice truck btw!

HydronicMike · January 22

Looks like you have this one, and they made their own mount

hot_rod · 2:02AM

if you do a lot of threaded pipe these portable threaders are super handy. They have cordless versions now.

I rarely used the pipe vise after I got one of these.

Does that truck have 120V receptacles in the bed.

EBEBRATT-Ed · 2:48AM

I have an Amigo 2 that I bought used 31 years ago. Works great i think.

I wouldn't know my brother scoffed it off me over 20 years ago and I haven't seen it since. Only threader I have left sold the others. Much lighter than a Rigid 700 and plenty of power.

Pipe Vise Stand and Bracket

Comments

Categories