Support steam pipe with split ring hangers
Options
branimal
Posts: 304
Can I support a horizontal run to a radiator with a split ring hanger? I'm wonder how expansion and contraction cycles will be impacted by such rigid support.
Thanks
0
Comments
-
use a clevis hanger
1 -
if the threaded rod is long it will work.
if the split ring is over the insulation it will work.
1 -
Over the insulation? Real risk of the pipe sagging with time…
Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
I Assume proper under support!
0 -
not if you use those little asbestos blocks that made owens corning go bankrupt
0 -
Clevis hangers all day for a better outcome.
Owner of Grunaire Climate Solutions. Check us out under the locate a contractor section. Located in Detroit area.
0
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 134 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements