Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Steam Boiler not turning on

Hello everyone, so I cleared out the dirty water from my steam boiler. 10 minutes later, the boiler just turned off with no single. I tried to turn it off and on after a few minutes and no single at all. Any suggestions for fixing it? 

It's a Weil mclain eg/peg50pidn s5

Welcome

It looks like you're new here. Sign in or register to get started.

Comments

  • GW
    GW Member Posts: 4,943
    10 minutes, the sort of sounds like the safeguard low water cut off. Did it come back on?
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
  • Dolphino
    Dolphino Member Posts: 5
    GW said:
    10 minutes, the sort of sounds like the safeguard low water cut off. Did it come back on?
    Nope. When I turn on the gas burner I see no single whatsoever. I cleared out much more water before and this never happened before.
  • Jamie Hall
    Jamie Hall Member Posts: 25,895
    Where is the water level in the sight glass?
    Br. Jamie, osb
    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
  • neilc
    neilc Member Posts: 3,019
    yeah, but, why is the VXT dark?
    Is the power on ?
    any other lights lit up on the boiler?
    jiggle the service switch?
    or the breaker?
    give us a picture of what you have there besides the water feeder.
    known to beat dead horses
  • Dolphino
    Dolphino Member Posts: 5
    neilc said:
    yeah, but, why is the VXT dark? Is the power on ? any other lights lit up on the boiler? jiggle the service switch? or the breaker? give us a picture of what you have there besides the water feeder.
    One of my buddy came to help, he said it's the power, not the boiler itself
  • Dolphino
    Dolphino Member Posts: 5
    Update: The power cut off somewhere so that's is why the whole thing wasn't turning on. The boiler is fine now.
    CLamb
  • neilc
    neilc Member Posts: 3,019
    ok, he didn't "Jump" anything to make it work?, did he?
    known to beat dead horses
  • GW
    GW Member Posts: 4,943
    Probably the “switch at the top of the stairs”
    An oldie but goodie 
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
    ethicalpaul
  • Dolphino
    Dolphino Member Posts: 5
    neilc said:
    ok, he didn't "Jump" anything to make it work?, did he?
    Nope, he just redid some wires and it started working. 

Welcome

It looks like you're new here. Sign in or register to get started.

Welcome

It looks like you're new here. Sign in or register to get started.