Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Thank You

I want to that all of you on this forum for all of your assistance, especially @New England SteamWorks for his work on my boiler and @gerry gill for the balancing chart. This is the first year I have not had a too hot or cold call during the winter in my building in 20 years.
JUGHNEAlan (California Radiant) Forbesratiomattmia2Erin Holohan HaskellkcoppSteamingatMohawk

Comments

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,455
    glad it all worked out
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,513
    I love this. Thanks. 
    Retired and loving it.
  • gfrbrookline
    gfrbrookline Member Posts: 753
    At first I questions the radiator vent sizing, 5-D in my condo building case, thought is was way to aggressive. It worked, heat is even and almost silent. My heat bill is also lighter on the wallet. This site is the best resource a novice can have when it comes to steam heat in an old building.

    Having Dan comment on one of my posts is a huge honor. His books have been my bibles of heating.

    Again, thank you all!
    ethicalpaulmattmia2Hap_Hazzardkcopp
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,513
    Thanks! I’m just another brick in the Wall. 😁
    Retired and loving it.
  • Hap_Hazzard
    Hap_Hazzard Member Posts: 2,846

    Thanks! I’m just another brick in the Wall. 😁

    You're the cornerstone.

    I'm just the excess mortar they scrape off and throw away. :D
    Just another DIYer | King of Prussia, PA
    1983(?) Peerless G-561-W-S | 3" drop header, CG400-1090, VXT-24
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,513
    No way throwing you away! 
    Retired and loving it.
    Hap_Hazzard