Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
I have an old 20x20 detached garage turned workshop. (No garage door and lots of windows.) It has natural gas supplied to it. I'm having a new floor poured soon and would like to place pex in the slab. I've never done this before but am handy enough to DIY. I realize it is probably an unconventional setup for hydronic heat, being so small of a space. Hence, some basic questions:
At 1 ft spacing, should I run one 400 ft loop of 5/8" or two 200 ft loops of 1/2"?
If I also add a sink to the room, closed or open system?
Boiler or tankless water heater?
Also, what are ways I can keep the system efficient in terms of energy consumption? Model numbers to look at for the mechanicals?
Thanks in advance.
- 115.9K All Categories
- 82.2K THE MAIN WALL
- 2.6K A-C, Heat Pumps & Refrigeration
- 40 Biomass
- 399 Carbon Monoxide Awareness
- 1.5K Domestic Hot Water
- 4.1K Gas Heating
- 102 Geothermal
- 146 Indoor-Air Quality
- 2.6K Oil Heating
- 40 Pipe Deterioration
- 646 Plumbing
- 4.7K Radiant Heating
- 345 Solar
- 12.9K Strictly Steam
- 2.8K Thermostats and Controls
- 46 Water Quality
- 573 Buy, Sell, Barter
- 30 Industry Classes
- 62 Job Opportunities
- 11 Recall Announcements