Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Holy Venting Batman!

I've always known my system was waaaaaay undervented.  Per the advice of the experts here I've finally begun venting my system properly.

I currently have NO main vents and pretty small adjustable Ventrites on all the radiators.

I just installed a MoM #5, a couple 6's, a C and a D.  I can't believe how much faster my system is getting hot!

Over the next week I'll be venting the mains too.  Should make an even bigger difference!

Comments

  • SlamDunk
    SlamDunk Member Posts: 1,571
    I'll say it should.
  • ethicalpaul
    ethicalpaul Member Posts: 5,695
    Should have vented the main first, you might have saved yourself having to do as much upstairs :)
    NJ Steam Homeowner. See my sight glass boiler videos: https://bit.ly/3sZW1el
    Precaud
  • AdmiralYoda
    AdmiralYoda Member Posts: 624
    Should have vented the main first, you might have saved yourself having to do as much upstairs :)
    Yep....but I have to build some bracing for the end of the main so I can really torque on it.  Right now it flexes too much when I whack it or try to loosen/tighten. 

    I'll be visiting the parents and will borrow my dad's 36" pipe wrench and cheater pipe.  Then the Big Mouth will be going on.
  • Neild5
    Neild5 Member Posts: 167
    The Big Mouth spud uses a 5/8 Allen wrench.