Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

sealer for a drain pan

Options
zepfan
zepfan Member Posts: 397
in A-C, Heat Pumps & Refrigeration
Does anyone know of a product that can seal a plastic evaporator drain pan that they have had good results with. Looking or suggestions. Thanks to all.

Comments

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,523
    Options
    Since it's plastic it must be cracked and not rotted. So epoxy would be more permanent. If it's in a spot you can use it. Silicone would be a more temporary repair
    zepfan
  • Ironman
    Ironman Member Posts: 7,376
    Options
    Try this:
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    Intplm.
  • mikeg2015
    mikeg2015 Member Posts: 1,194
    Options
    I used some epoxy and cut a patch wit ha small piece of metal. this was to seal one of the drains that broke off.

    Most epoxy stick to about any surface and material. Best results might be to put down some epoxy, then a small piece of fiberglass cloth placed over the crack then epoxy over it. might need a slower setting epoxy for this.
    zepfan
  • HVACNUT
    HVACNUT Member Posts: 5,835
    Options
    Ask the Flex Seal guy.
  • Leon82
    Leon82 Member Posts: 684
    Options
    > @HVACNUT said:
    > Ask the Flex Seal guy.

    On one of my local Facebook groups people use it to seal their pool liner.

Categories