Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Replaced Burnham Boiler Banging and Clanging

Options
2»

Comments

  • Dave in QCA
    Dave in QCA Member Posts: 1,806
    edited May 2018
    @Jamie Hall , @SlamDunk
    Forgiveness, I say yes, it's a word. Don Henley thinks so too. Listen at 1:39
    https://www.youtube.com/watch?v=tBJUTm9ez0g

    Dave in Quad Cities, America
    Weil-McLain 680 with Riello 2-stage burner, December 2012. Firing rate=375MBH Low, 690MBH Hi.
    System = Early Dunham 2-pipe Vacuo-Vapor (inlet and outlet both at bottom of radiators) Traps are Dunham #2 rebuilt w. Barnes-Jones Cage Units, Dunham-Bush 1E, Mepco 1E, and Armstrong TS-2. All valves haveTunstall orifices sized at 8 oz.
    Current connected load EDR= 1,259 sq ft, Original system EDR = 2,100 sq ft Vaporstat, 13 oz cutout, 4 oz cutin - Temp. control Tekmar 279.
    http://grandviewdavenport.com
    SlamDunk
  • rbeck
    rbeck Member Posts: 56
    How many times can it be re-piped and still not be piped correctly. All those mains should also be piped back separately to the header.
    Dan Foley

Categories