›
Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.

If you've found help here, check back in to let us know how everything worked out.
It's a great way to thank those who helped you.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

New Toys

New England SteamWorksNew England SteamWorks Member Posts: 1,276
in Strictly Steam
A Testo 330i. No more printers and thermo paper! All done on my iPhone. Pretty cool I must say.



How about a mitten & boot warmer? Just as cool...





New England SteamWorks
Service, Installation, & Restoration of Steam Heating Systems
newenglandsteamworks.com
· Share on Google+

Comments

  • STEVEusaPASTEVEusaPA Member Posts: 3,478
    Don't you have to leave a copy of the combustion test on site?
    steve
    · Share on Google+
  • New England SteamWorksNew England SteamWorks Member Posts: 1,276
    Yep. I email it!


    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
    · Share on Google+
  • gerry gillgerry gill Member Posts: 2,960
    not sure which is cooler, the testo or the plate warmer!
    gwgillplumbingandheating.com

    Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.

    · Share on Google+
  • SteamheadSteamhead Member Posts: 13,349
    New England SteamWorks said:

    Yep. I email it!

    Not sure all inspectors would accept that. Around here, hard copies must be left in the boiler room- manuals, logbook on commercial jobs, combustion test results etc. Printing out the results and leaving them on the job is the way to make sure it actually gets done.
    All Steamed Up, Inc.
    "Reducing our country's energy consumption, one system at a time"
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Baltimore, MD (USA) and consulting anywhere.
    https://heatinghelp.com/find-a-contractor/detail/all-steamed-up-inc
    · Share on Google+
  • tim smithtim smith Member Posts: 2,292
    I want the plate warmer, way cool.
    · Share on Google+
  • GWGW Member Posts: 3,457
    I’ll pay triple the scrap value for your metal chunk :smile:
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    www.wilsonph.com
    [email protected]
    · Share on Google+
  • newagedawnnewagedawn Member Posts: 549
    cool plate warmer
    "The bitter taste of a poor install lasts far longer than the JOY of the lowest price"
    · Share on Google+
  • nicholas bonham-carternicholas bonham-carter Member Posts: 7,965
    Speaking of plate warmers—
    In 1968, I stayed with a Sikh family in (then called) Bombay.
    At mealtimes the food consisted of multiple courses, kept warm on silver trays sitting on a very ornate frame with candles underneath. When I commented on how beautiful it was, my friends mother said she wished she had an electric plate warmer, but they were not sold in India. She said the whole thing had to be washed and polished for each meal by one of their many sevants. I should have made a trade of a couple of electric plate warmers for that magnificent setup.
    They were relieved that I ate their delicious food, and did not require separate dishes of “English food”.
    A hundred feet away, 10-storey apartments were being constructed. All the scaffolding was bamboo, and the workers carried the concrete up in buckets strapped to their backs!
    Air conditioning was by an ancient unbalanced ceiling fan which wobbled above me.—NBC
    · Share on Google+
  • BobCBobC Member Posts: 5,013
    @nicholas bonham-carter I was in Korea in '69 and spent a week at the transmitter site for some OJT. On the way to that site that was on a good sized hill we went through some interesting sections of Seoul. One block had old buildings with corrugated steel roofing (probably filched from the army after the war) and then you would see a 10-15 story building being put up with bamboo staging. After that week I was on the UN train south to Tageau and then a 26 mile truck ride over mountain roads to the site I was assigned to.

    Looking at pictures of Seoul today it's hard to believe it's the same city I drove through almost 50 years ago.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
    · Share on Google+
  • New England SteamWorksNew England SteamWorks Member Posts: 1,276
    Testo was the first. Just a matter of time before email will be the standard. Technology marches on, oblivious to the whims of officials and bureaucrats. The survival rate of thermo-paper receipts in boiler rooms is miniscule any way...




    New England SteamWorks
    Service, Installation, & Restoration of Steam Heating Systems
    newenglandsteamworks.com
    · Share on Google+
  • SteamheadSteamhead Member Posts: 13,349
    New England SteamWorks said:

    Testo was the first. Just a matter of time before email will be the standard. Technology marches on, oblivious to the whims of officials and bureaucrats. The survival rate of thermo-paper receipts in boiler rooms is miniscule any way...

    Well, as long as these "officials and bureaucrats" can fail our jobs for not having combustion test printouts on site, we'll keep printing them out. I'll probably be retired before e-mailed results are accepted here.

    All Steamed Up, Inc.
    "Reducing our country's energy consumption, one system at a time"
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Baltimore, MD (USA) and consulting anywhere.
    https://heatinghelp.com/find-a-contractor/detail/all-steamed-up-inc
    · Share on Google+
Sign In or Register to comment.

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links

Categories