Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Complete ripout

Options
Dave0176
Dave0176 Member Posts: 1,178
edited April 2017 in A-C, Heat Pumps & Refrigeration





Started a complete ripout and replacement of a very inadequate duct system including all 4" branch lines. I recut all the stackheads in and ran new trunk. The old return was tiny at 18X7 which fed a oversized 100,000 BTU Janitrol furnace. Going in with a York 96% 80,000 BTU furnace and a York 17 SEER condenser. It's a lot of work but we're moving along.
DL Mechanical LLC Heating, Cooling and Plumbing 732-266-5386
NJ Master HVACR Lic# 4630
Specializing in Steam Heating, Serving the residents of New Jersey
https://heatinghelp.com/find-a-contractor/detail/dl-mechanical-llc

https://m.facebook.com/DL-Mechanical-LLC-315309995326627/?ref=content_filter

I cannot force people to spend money, I can only suggest how to spend it wisely.......
ChrisJ

Comments

Categories