Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Mod/Con class run recently comment
Options
Tim McElwain
Member Posts: 4,657
I wish all of you had attended the class it was really a pleasure for me to teach and I think a great improvement over the first one I did. We sure covered a lot in four days.
A comment from a tech:
Hi Tim,
Hope all is well,
Want to thank you again for the Mod/Con training, I guess some would say it sucks to be one on one with your instructor, but it worked to my advantage when you figured out the areas I struggled with and lack of bad habits I've picked up over my career.
Your training was very informative and to the point, you provided me with manuals and literature on a wide variety of Mod/Con equipment that will definitely be an asset to me in the field as long as I stay active and familiarize myself with this technology.
In closing, it is my opinion and should be a prerequisite that Anyone purchasing, installing and servicing Mod/Con equipment should be required to take your training program.
You are a definite asset to the industry!
Best,
Tony
A comment from a tech:
Hi Tim,
Hope all is well,
Want to thank you again for the Mod/Con training, I guess some would say it sucks to be one on one with your instructor, but it worked to my advantage when you figured out the areas I struggled with and lack of bad habits I've picked up over my career.
Your training was very informative and to the point, you provided me with manuals and literature on a wide variety of Mod/Con equipment that will definitely be an asset to me in the field as long as I stay active and familiarize myself with this technology.
In closing, it is my opinion and should be a prerequisite that Anyone purchasing, installing and servicing Mod/Con equipment should be required to take your training program.
You are a definite asset to the industry!
Best,
Tony
4
Comments
-
-
Count me in for that too
. I just cant get up to Tim's neck of the woods, and I'm pretty sure he's not coming down to the Philadelphia area. There was an error rendering this rich post.
0 -
2,424 mile drive from here
0
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 114 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements




