Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

dual manometer

Paul_69
Paul_69 Member Posts: 251
I have a digital dual manometer and has hoses and fittings for checking gas valves.the taps on manometer and hoses are a little smaller than pressure switch hoses on gas furnaces. Is there a way to hook this meter to dothat as this is why I bought it, to do both. Thx

Comments

  • Zman
    Zman Member Posts: 7,561
    You can usually find universal tubing couplers at hardware stores. They are stepped so you can connect different hose sizes together.
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
  • icesailor
    icesailor Member Posts: 7,265
    Or at auto parts stores. They usually have a bigger selection.

    Without hoses and connections, modern automobiles can't operate.
  • Paul_69
    Paul_69 Member Posts: 251
    Thx alot guys
  • SWEI
    SWEI Member Posts: 7,356
    Most meters have 1/4" hoses on them. 5/16" hoses seal to most gas valves.

    a 1/4" x 5/16" barb coupler and a foot of 5/16" hose will do the trick.
  • Tim McElwain
    Tim McElwain Member Posts: 4,612
    Try a fish tank store they all kinds of tubing and adapters that is were I get mine.
  • Empire_2
    Empire_2 Member Posts: 2,343
    Nice Tim. They do have "T's for attaching with different tubing.