Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
reverse indirects
Options
Steve_210
Member Posts: 664
where can i find more info on these
0
Comments
-
TurboMax
http://www.thermo2000.com/
There is another company out there, but their quality has dropped in the last few years...
ME0 -
thanks
mark. another question, whats a safe distance dropping below the tank for a heat trap. weilmclain 100 plus0 -
Mark was
the other company Ergomax?0 -
Yes Tim, Ergomax...
ME0 -
I'd give it a foot...
I know most people say 6" will work, but I've caught 6" traps bleeding hot water through the piping. Be sure and insulate anything within 2' of the top of the tank.
ME0 -
thanks
thanks again mark0
This discussion has been closed.
Categories
- All Categories
- 87.6K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 429 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 119 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 394 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 50 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements