Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
reverse indirects
Steve_210
Member Posts: 647
where can i find more info on these
0
Comments
-
TurboMax
http://www.thermo2000.com/
There is another company out there, but their quality has dropped in the last few years...
METhere was an error rendering this rich post.
0 -
thanks
mark. another question, whats a safe distance dropping below the tank for a heat trap. weilmclain 100 plus0 -
Mark was
the other company Ergomax?0 -
Yes Tim, Ergomax...
METhere was an error rendering this rich post.
0 -
I'd give it a foot...
I know most people say 6" will work, but I've caught 6" traps bleeding hot water through the piping. Be sure and insulate anything within 2' of the top of the tank.
METhere was an error rendering this rich post.
0 -
thanks
thanks again mark0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements