Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

reverse indirects

where can i find more info on these

Comments

  • Mark Eatherton
    Mark Eatherton Member Posts: 5,853
    TurboMax

    http://www.thermo2000.com/



    There is another company out there, but their quality has dropped in the last few years...



    ME
    It's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.
  • Steve_210
    Steve_210 Member Posts: 646
    thanks

    mark. another question, whats a safe distance dropping below the tank for a heat trap. weilmclain 100 plus
  • Tim McElwain
    Tim McElwain Member Posts: 4,612
    Mark was

    the other company Ergomax?
  • Mark Eatherton
    Mark Eatherton Member Posts: 5,853
    Yes Tim, Ergomax...

    ME
    It's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.
  • Mark Eatherton
    Mark Eatherton Member Posts: 5,853
    I'd give it a foot...

    I know most people say 6" will work, but I've caught 6" traps bleeding hot water through the piping. Be sure and insulate anything within 2' of the top of the tank.



    ME
    It's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.
  • Steve_210
    Steve_210 Member Posts: 646
    thanks

    thanks again mark
This discussion has been closed.