Welcome! Here are the website rules, as well as some tips for using this forum.

Need to contact us? Visit https://heatinghelp.com/contact-us/.

Click here to Find a Contractor in your area.

Sweating in ball valves 1.5" , disassemble before sweating?

Leonard · 2019-03-04 19:05:34

Dumb question, but should I disassemble ball valves before soldering them on copper pipe, so plastic seal parts doesn't get damaged from heat. Ball valves are to isolate boiler from rest of house FHW, to make future repairs easier.

Comments

EBEBRATT-Ed Member Posts: 16,298

March 2019

Mag separator will not hurt.

0

Sweating in ball valves 1.5" , disassemble before sweating?

Comments

Categories