Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Crown boilers vs. Weil Mcclain or Burnham
Options
Darren_5
Member Posts: 11
How would you rate the Crown Boiler? I have a 3 family rental and need 3 boilers 60,000btu each. Is crown acceptable in the industry or is it considered low budget? How bout construction wise?
0
Comments
-
Some of the folks here love the oil units
The Tobago's your average pin type cast iron boiler. The Freeport is a nice high efficent 3 pass scotch marine design with german castings. Their gas units are probably made by Dunkirk, which are also OK cast iron boiler. There are not the higher efficency models.0 -
They are all good
brands.
If the job calls for a sealed combustion I feel the Crown CSC Cabo has a leg up on competitors. I'm a big fan of sealed combustion!
Wet leg casting design, and a nice, Taco built, control board with DHW priority built onto the board. The controls are all under the hood for looks and protection, and safer shipping, nice touch
I also like the color comb on the jacketing
hot rod
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 848 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements