Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Crown boilers vs. Weil Mcclain or Burnham

Options
Darren_5
Darren_5 Member Posts: 11
in THE MAIN WALL
How would you rate the Crown Boiler? I have a 3 family rental and need 3 boilers 60,000btu each. Is crown acceptable in the industry or is it considered low budget? How bout construction wise?

Comments

  • DaveGateway
    DaveGateway Member Posts: 568
    Some of the folks here love the oil units

    The Tobago's your average pin type cast iron boiler. The Freeport is a nice high efficent 3 pass scotch marine design with german castings. Their gas units are probably made by Dunkirk, which are also OK cast iron boiler. There are not the higher efficency models.
  • hr
    hr Member Posts: 6,106
    They are all good

    brands.

    If the job calls for a sealed combustion I feel the Crown CSC Cabo has a leg up on competitors. I'm a big fan of sealed combustion!

    Wet leg casting design, and a nice, Taco built, control board with DHW priority built onto the board. The controls are all under the hood for looks and protection, and safer shipping, nice touch

    I also like the color comb on the jacketing :)

    hot rod

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.

Categories