How do you tell if a slow leak has damaged the wall or subfloor?
Hi everyone,
I've been reading about how slow leaks from supply lines, water heaters and drain connections can cause hidden damage long before any stain shows up. Most of the time the first sign is a musty smell or a soft spot in the drywall or baseboard.
I'm curious how you guys check for this during a service call. Do you use a moisture meter or a thermal camera, or do you mostly go by visual inspection and smell?
Also, when you do find damage after a repair, how do you handle it with the homeowner? Do you recommend drying the area before closing up the wall, or leave that to a separate contractor?
Would love to hear what has worked for you in the field.
Thanks!
Comments
-
-
amazing how cynical I’ve become about generic scenario questions like this. “Wonder what LLM agent this is?”
0
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 136 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.2K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 52 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements

