Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Understanding Hydronics

Options
AnthemPlumbing
AnthemPlumbing Member Posts: 3
in Radiant Heating

My partner and I are eager to deepen our knowledge of hydronics and are looking for solid resources—seminars, books, online courses, etc. If you were starting from the ground up, where would you begin?

Mad Dog_2

Comments

  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 11,573

    This website is a good start. loook ar all the videos available on YouTube by HeatingHelp.com Featuring Dan Holohan. I learned more from those seminars when I attended them than in any Trade School. It was nice of Dan to provide video of his classes. He retired and therefor no nonger teaching in person. 😕

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

    Mad Dog_2HeatingHelp.comAnthemPlumbing
  • hot_rod
    hot_rod Member Posts: 26,580

    here is a good intro to the basics.

    https://www.caleffi.com/sites/default/files/media/external-file/Idronics_12_NA_Hydronic%20fundamentals%20.pdf

    The entire Caleffi Idronics library is a free download at www.caleffi.com

    There is also a Caleffi You Tube channel with recorded webinars

    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
    HydronicMikeethicalpaul
  • Mad Dog_2
    Mad Dog_2 Member Posts: 8,395

    Two Books to warm up with ....1) "Pumping Away" by Dan Holohan, Our Founder!

    2)"We got Steam Heat...." Also by Dan.

    Start your journey there. Mad Dog

    Consulting by Mad Dog & Matt Jr.
    HeatingHelp.comAnthemPlumbing
  • mattmia2
    mattmia2 Member Posts: 15,591

    @RayWohlfarth 's videos are good too. i watch pretty much every instructional video at around 2x.

    Intplm.AnthemPlumbing
  • Intplm.
    Intplm. Member Posts: 2,829
    edited December 24

    This sight is hands down the best place. The books that are offered are terrific. Be sure to give them a look.

    Here is another very helpful booklet. It was written by the founder of this site and is a good read, too.

    Zoning Made Easy..pdf
    AnthemPlumbing
  • mattmia2
    mattmia2 Member Posts: 15,591

    @Tim McElwain 's training materials are really good too. They may not be the best organized but they have a lot of stuff that is hard to impossible to find elsewhere. I think you have to buy them directly from him.

    @HeatingHelp.com I have a suggestion for the bookstore part of the site, it would be nice to be able to search by author and to be able to see the author(s) in the list.

    AnthemPlumbingIntplm.HeatingHelp.com

Categories