Safety Relief Valve
Options
simon_skove
Posts: 85
I have the attached conbraco safety relief valve on my boiler. Checking the label…is this a problem?
Anyone think this is the wrong safety valve?
0
Comments
-
Are we talking steam or hot water here?
Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
Sorry, two pipe vapor steam
0 -
The 15 psig release pressure is correct.
Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
I believe @simon_skove might be asking about the language on the tag that seems to indicate this is a hot water pressure relief valve.
I too am confused by the language on the tag, but the valve is in fact a low pressure steam safety relief valve it appears:
NJ Steam Homeowner.
See my sight glass boiler videos: https://bit.ly/3sZW1el0
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 134 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 52 Job Opportunities
- 18 Recall Announcements