NTI & HTP Boiler Recall
Options
Steamhead
Posts: 18,987
Comments
-
Looks like certain HTP boilers use the same HX
1 -
Carbon monoxide poisoning from incorrect burner door studs? It’s usually the gasket that’s the problem.
Maybe the studs break off because they were over-torqued at the factory.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
Or they were out of dimensional tolerances or they were the wrong material or they weren't heat treated properly.
0 -
At least they found the problem fairly quickly its only 800 boilers.
0 -
-
Thanks for clarifying which model. The original article was negligent in not specifying the model but just stating the brand.
Bob Boan
You can choose to do what you want, but you cannot choose the consequences.0
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 133 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements