Good Draw
Options
Alan (California Radiant) Forbes
Posts: 4,896
Pray for white smoke, but as a heating contractor, I’d be alarmed.
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab
Two btu per sq ft for degree difference for a slab
4
Comments
-
That's one of the of the Cardinal rules of combustion @Alan (California Radiant) Forbes.
Edward Young Retired
After you make that expensive repair and you still have the same problem, What will you check next?
4 -
You really buried the Bishop with that one.
4 -
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 134 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements