rinnai 38k vented heater “L” on display
Options
garye5007
Posts: 3
in Gas Heating
Picked up a Rinnai 38K vented heater,used,.hooked it up to gas to test it fires up ok.i set the temperature at 78° and it shows L on display. The manual states that it’s in low combustion mode (I think). It’s in a cold room. No error code. Can I get this thing to run in high combustion mode?
0
Comments
-
Got the manual?
Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
yes, I have the manual . Says this.
0 -
also this… temp control logic?
0 -
Does it show it after the setpoint temp goes away? How cold is the room you have it in?
0
Categories
- All Categories
- 87.8K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 133 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 79 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements