Good old boy efficiency (burner limits)
Maintained by his uncle. He called to schedule a cleaning because his domestic hot water temperature wasn't warm enough. It did have a brand new smoke pipe though, he said it's the third one that his uncle has installed since he's been in the house.
Comments
-
Sorry, though I attached the pic the first time
0 -
what am I looking at?
Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
I'd hope NOT Boiler operating temperatures!
0 -
I think it is a Honeywell triple acting aquastat on a Burnham oil boiler with tankless coil.
0 -
but… why?
Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
SeasonalS operating high and low limit temperatures written on the cover of an aqua stat on Burnham with a coil.
0 -
It is obvious that @Robert_H is asking for the proper way to fix this insufficient hot water problem.
Duct Tape and a Sharpie would be my suggestion.
Edward Young Retired
After you make that expensive repair and you still have the same problem, What will you check next?
11 -
Actually, I set the High and low limit and marked it all out with a sharpie. but I like the duck tape option.
2 -
I can imagine the condition of the chimney for that boiler. I doubt there's much left of the terra cotta if it's a masonry chimney.
3
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 100 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 101 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 66 Pipe Deterioration
- 934 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements