Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Tower blow down valve needed

Options
zepfan
zepfan Member Posts: 432
in THE MAIN WALL

I am looking for an alternate electric valve (110 volt) for a blow down line for a cooling tower. We normally use a red hat solenoid valve, diaphragm type. For some reason they tend to leak more easily causing water treatment to be lost from the tower Maybe a ball valve type would be better.

I did not know if anyone knew of ball valve type that is controlled by a 110 volt actuator. 3/4" fpt. thanks to all

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • Steamhead
    Steamhead Member Posts: 17,884

    Try Belimo.

    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    hot_rodzepfan
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 18,164

    Everyone make them. But as @Steamhead mentioned Belimo is one of the most popular.

    zepfan
  • pecmsg
    pecmsg Member Posts: 6,267

    You should have a strainer before that valve.

    Any motorized valve will work.

    Daily makeup water readings should be taken to notice the issue before losing all those chemicals.

    zepfan

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories