Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Power Purge oil line
Robert_H
Member Posts: 191
Quoting @STEVEusaPA from a post I was reading - "First check the system for a vacuum leak, then power purge the fuel line."
I've had to do long bleeds after blowing back a fuel line or on stupid long overhead lines but maybe Steve is talking about a good technique I should know about.
Robert
0
Comments
-
Over head oil lines , install a tiger loop and job done….
There was an error rendering this rich post.
0 -
I agree!
0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 110 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 979 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements