Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Power Purge oil line
Robert_H
Member Posts: 180
Quoting @STEVEusaPA from a post I was reading - "First check the system for a vacuum leak, then power purge the fuel line."
I've had to do long bleeds after blowing back a fuel line or on stupid long overhead lines but maybe Steve is talking about a good technique I should know about.
Robert
0
Comments
-
Over head oil lines , install a tiger loop and job done….
There was an error rendering this rich post.
0 -
I agree!
0
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements