Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Identify this baseboard heater

heatdog
heatdog Member Posts: 3
edited October 1 in Radiant Heating

Hoping someone can help with this. Tried looking thru the manufacturers I know and an image search but cant locate this model. Looking to replace the enclosure. Anyone have any idea what manufacturer/model this is? Thanks in advance!

Comments

  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,511

    It could be Haydon, Embassy or old Beacon Morris...don't look like Slant fin to me. Mad Dog

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 16,402

    not Slant Fin, not Sterling

    Mad Dog_2
  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,511

    Never heard of Sterling..Mad Dog

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 16,402

    @Mad Dog_2

    Sterling is very popular around here (MA.) they are owned by Mestek who own HB Smith, Hydrotherm and bunches of other companies.

    Sterling has been around forever and make baseboard, gas fired unit heaters and bunch of other stuff. Office in Westfield, Ma about 10 miles from me.

  • pecmsg
    pecmsg Member Posts: 5,282

    There are companies that make generic replacement covers.

  • offdutytech
    offdutytech Member Posts: 156

    @pecmsg There are several companies that make replacement covers. Baseboards / Vent and Cover / Veil and Slant Fin Revitaline to name a few depending on what look you want

  • mattmia2
    mattmia2 Member Posts: 10,856

    I thought Sterling was American Standard's budget branding, but that might be a different Sterling.

  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 9,317
    edited October 1

    looks like Slant Fin element. they have a gray plastic saddle that the element sits in at each support. IIRC

    Found this:

    https://www.amazon.com/Slant-Fin-Hydronic-Complete-Baseboard/dp/B00KX9U2SI

    With that little gray plastic cradle at the support.

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 9,317

    It always amazes me that the DMV will issue IDENTIFICATION for just about anything.

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?

  • heatdog
    heatdog Member Posts: 3

    Added a few more pictures to show side profile and cradle. Does not look like slantfin. Interesting design though. Not flimsy at all.

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 16,402

    @mattmia2 No sterling is not part of American standard, Sterling owned by Mestek.

    Mestek owns Sterling, Vulcan radiation, Slant Fin, HB Smith boilers, Hydrotherm etc etc they own probably 30 companies maybe more

  • EdTheHeaterMan
    EdTheHeaterMan Member Posts: 9,317

    I remember SlantFin had a #15 model that is no longer on the website today. I'm wondering if it was another company that renamed that SlantFin 15 and sold under another name. It was less than 7" tall and I remember that curve at the top of the inside. It definitely has the right kind of element to be SlantFin, or that company got their element from SlantFin.

    Edward Young Retired

    After you make that expensive repair and you still have the same problem, What will you check next?