Will any similar compressor do.
 
            I have a Weather King 10AJA4201that has a grounde compressor. The Air Handler is good. It just needs a well-deserved cleaning. The AC Tech remarked that it was so clogged it returned liquid back to the compressor and that may have been the cause for the failure. It's a R22 compressor which I feel I can get a hold of rather easily with similar characteristics to the condenser Unit nameplate, but is that enough to assure a good fit?
Comments
- 
            
- 
            No way. A 21 year old R22 system with a burn out? It's a lot more than just a compressor replacement. Any talk of a replaceable core suction line drier with the HVAC Tech? That should've been part of the conversation. And you know it will need virgin refrigerant, right? R22 is $$$. Contactor, relay, capacitor, even ECM blower motor, I would say go with the repair. But a burn out? 0
- 
            It's over 20 years old and just blew burned oil and junk all through the entire system. It's time for all new. Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times. 0
Categories
- All Categories
- 87.2K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 427 Carbon Monoxide Awareness
- 118 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 112 Geothermal
- 164 Indoor-Air Quality
- 3.7K Oil Heating
- 73 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements




