Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Not calling for heat.

Cklee109
Cklee109 Member Posts: 1
in A-C, Heat Pumps & Refrigeration
My amana distinction until isn’t calling for heat. We had the honey well control board go out and they replaced it with a hz322. I believe it is a wiring issues. Da temp is 63 and thermostats are calling for heat. Do I need a jumper on the equipment side like I have on the zone side? 

Comments

  • HVACNUT
    HVACNUT Member Posts: 7,085
    Is the zone panel configured properly?
    It should be running in Heat pump for primary heat. What's used for auxiliary and emergency heat? Electric resistance? Hydro coil?
  • pecmsg
    pecmsg Member Posts: 6,584
    If they just replaced it contact your service provider. Making any changes can void your warranty.

Categories