Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Buderus g115 with hydrostat - correct settings?
Options
Hanna61
Member Posts: 34
in Oil Heating
So I finally got the time to reading the materials that came with the boiler due to life craziness, and I just want to make sure I'm reading right.
The boiler is for 3 zones of base board heating only (no domestic hot water), so I gathered that the settings should be:
High - 190
Low - Off
Economy 3 or 4 as one of our zones is set very low though not sure if this matters.
Am I understanding this right?
THanks!
The boiler is for 3 zones of base board heating only (no domestic hot water), so I gathered that the settings should be:
High - 190
Low - Off
Economy 3 or 4 as one of our zones is set very low though not sure if this matters.
Am I understanding this right?
THanks!
0
Comments
-
You may not need it to go as high as 190. You can try lower -- perhaps 180 -- and see if it keeps you warm.Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
Thanks Jamie!0
Categories
- All Categories
- 87.5K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 430 Carbon Monoxide Awareness
- 122 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.9K Gas Heating
- 116 Geothermal
- 169 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 395 Solar
- 15.9K Strictly Steam
- 3.5K Thermostats and Controls
- 57 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements